Sloped aluminum enclosure,anodized aluminum enclosure,cnc milled aluminum enclosure

With the current demand for lightweight in many markets, aluminum alloy has become the preferred choice of more and more component manufacturers. At the same time, the processing of aluminum alloy products has also attracted much attention, and aluminum enclosure is one of them. At present, there is a matte aluminum enclosure on the market, so what is the matte effect of the aluminum enclosure?

Generally speaking, the matte effect of aluminum enclosure surface is divided into physical and chemical processes.

1. Chemical process is generally divided into alkaline sand and acid sand.

The chemical process is generally carried out in the anodizing process of sloped aluminum enclosure. The alkaline sand process is to put the aluminum enclosure into a high concentration alkaline solution to corrode the surface of the profile, so as to form a matte effect. The principle of acid sand is similar. Will corrode part of the surface of the anodized aluminum enclosure. However, the aluminum enclosure treated by this chemical process will make the surface effect look more natural, but it will cause certain damage to the aluminum enclosure, which is not very environmentally friendly. In addition, the inner cavity of the aluminum enclosure treated by the chemical process will also have a matte effect, but the physical process will not change the inner cavity of the enclosure and maintain the original appearance of the cnc milled aluminum enclosure.

1. Physical process generally refers to sand blasting, and the sand is carborundum.

Pass the aluminum enclosure material through the sand blasting machine to make the fine and dense sand form small pits on the surface of the sloped aluminum enclosure that are almost invisible to the naked eye. The aluminum enclosure before us is still smooth. In terms of visual effects, the light becomes matte. The particle size of carborundum is not used, and the influence of spraying on the profile is also divided into thickness. The sandblasted aluminum enclosure is anodized to form a layer of dense transparent oxide film on the surface to increase corrosion resistance.

What are the methods to distinguish the quality of aluminum enclosure?

1. Look at the aluminum plate. The aluminum plate must be thick. You can feel what is thick and what is thin by tapping it with your fingers.

1. Look at the function: the first consideration should be security.

1. Look at the painting. For a qualified cabinet, all aluminum materials need to be painted, and the painting must be average, so as to prevent rust and dust.

1. Look at the glass. The glass must be thicker. You should also pay attention to whether there are cracks around the glass. If there are cracks, it means there are hidden dangers. You should also pay attention to whether it is difficult.

1. Looking at the architecture layout, generally speaking, there should be many baffles with heat dissipation holes. Some aluminum sheets used to fix cables should be wrapped to prevent damage to cables. The side wall fan shall be installed on the rear wall of the cabinet, because most of the heat is generated at the rear of the equipment.

1. Look at the accessories, because the installation includes network cables, telecommunication cables and power cables, you need to buy hook and loop belts or toothed belts to effectively fix the cables in the cabinet orderly. If the cabinet is equipped with a cable management module, so that the cable can be directly fixed in the vertical installation rail, it is better.

1. Look at the heat dissipation. Estimate how much heat your equipment has. Generally speaking, there are two to four fans on the top of the cabinet. The more the better. There are also sufficient screws and nuts used to fix the rack. It will not cause the trouble of insufficient accessories due to future expansion.

Searching for sloped aluminum enclosure,anodized aluminum enclosure,cnc milled aluminum enclosure from China, you can get high-quality products at a nice price.