Remember! Use the Mixer, these Mistakes can not be Made!(2)

June 23,2022

Fender squier strat tone knobs, ibanez volume and tone knobs, tone knobs on squier strat

4. Do not pay attention to the audio-visual adjustment button

 

In each input channel of the mixer, an audio-visual adjustment button pan is set and marked with L or R. when the knob is turned to the L position, it means that all the signals of this channel are transmitted to the l-channel output. Similarly, when it is turned to the R position, it means that all the signals of this channel are transmitted to the r-channel output. When it is in the middle position, it means that both the L and r-channel signals of this channel are output.

 

According to the general sound reinforcement requirements, when the microphone does not emphasize the audio-visual position, the pan is in the middle position. When it is used as stereo signal input (such as DVD, card holder, etc.) and the system is in the form of two-way sound reinforcement output, if two input channels are used, the pan of one channel is in L and the pan of the other channel is in R. do not adjust blindly. For stereo input channel, the balance knob should be in the middle.

 

fender squier strat tone knobs, ibanez volume and tone knobs, tone knobs on squier strat

 

5. Do not pay attention to the auxiliary output knob

 

Each input channel of the console is equipped with an adjustment button aux for the size of the auxiliary output signal. There are 5 or 6 channels for more and 3 or 4 channels for less. These knobs should be in different positions according to the final use of the auxiliary channel of the console. It is forbidden to put them in the "0" position of the closed position or in the middle position whether they are used or not (people are used to putting knobs that they do not know to use in the middle position).

 

In fact, the use of the mixer is very flexible. Different systems and different applications have different usages, and the same is true for the auxiliary channel. Some are connected to the output of the auxiliary speaker, some are connected to the input of the effector, and some are used as signal input to other devices. If you don't understand it, you can put it in the "off" position or in the middle position. Wouldn't it be a mess?

 

Here I would like to talk about the problem of connecting the auxiliary output channel to the effector. As we all know, the effector is mainly used to increase the effect of human voice. When playing music, there is no need to apply effects. Adding effects can only destroy the effect of music and reduce the restored clarity. This requires us to figure out which auxiliary channel knobs should be turned on and which auxiliary channel knobs should be turned off according to the connection method of the effector, and which channel of auxiliary output should correspond to it.

 

We are a fender squier strat tone knobs, ibanez volume and tone knobs, tone knobs on squier strat exporter supplier wholesaler, our products satisfy our customers. And we want to be your long-term partner, any interests, welcome to contact us.

SHARE US: