When the knob on the electric guitar fails, most people will choose to buy a new aluminum control knob switch and install it by themselves. But if you don't understand the installation method, you may cause secondary damage to your electric guitar.

Fortunately, today in this blog I will mainly share with you some installation steps.

3 Steps for Installing Guitar Control Knob Switch

First, you need to prepare the necessary tools: a small screwdriver and some silver black aluminum control knob switches.

Next, after removing the strings, you need to use a screwdriver to loosen the screws on the back of the headstock, and then use a 10mm nut driver to loosen the screws under the front tuner posts. If your guitar has protective pads on the tuners, don't replace them, you can use them to protect the paint around the tuners from scratches.

Then when installing the new silver black aluminum control knob switches, put them in the holes of the headstock one by one, install the small screws, and tighten them with a screwdriver and nut driver.

You also need to be careful not to overtighten the screws or you will damage the wood inside the headstock. This damage is irreparable. And if you use too much force, you may break the tuners, so you have to buy another one.

For control knob switches. without screws, you just need to insert them exactly. Therefore, carefully observe the type of your guitar control knob switches, and purchase control knob switches with matching specifications.

Finally, the above is how to install silver black aluminum control knob switches. But before you install it, you need to pick out quality control knob switches for your precious guitar. As a professional guitar accessories supplier, we can provide you with good suggestions and products.

We have a mechanical dial switch control knob marker knob.

Any interests, welcome to contact us.